November 20, 2017

Space station cargo shipment blasts off aboard Antares rocket

Credit: NASA/Bill Ingalls

An Orbital ATK Cygnus supply ship packed with 3.7 tons of cargo, supplies and experiments rode an Antares rocket into orbit from Virginia’s Eastern Shore on Sunday, setting course on a two-day pursuit of the International Space Station.

Running a day late after an airplane strayed into restricted airspace, scrubbing a launch attempt Saturday, the 139-foot-tall (42.5-meter) Antares rocket lifted off at 7:19:51 a.m. EST (1219:51 GMT) Sunday from Wallops Island, Virginia.

Arcing toward the southeast from its oceanside launch pad, the Antares rocket climbed through broken clouds, putting on a thunderous early morning sky show for spectators gathered near NASA’s Wallops Flight Facility.

Two Russian-built RD-181 main engines gave the Antares rocket an initial boost with around 864,000 pounds of thrust, then a solid-fueled Castor 30XL second stage, made by Orbital ATK, motor ignited to finish the task of placing the Cygnus cargo craft into orbit.

A commentator from Orbital ATK’s launch team called out flight events during the seven-minute ascent into orbit, noting normal performance from the Antares rocket throughout the flight.

The Cygnus supply ship deployed from the Antares second stage around nine minutes into the mission as it flew in range of a tracking station in Bermuda. Telemetry from the rocket indicated it placed the Cygnus spacecraft in an orbit between 124 miles (200 kilometers) and approximately 205 miles (330 kilometers) in altitude, slightly higher than predicted.

The Cygnus spacecraft unfurled two fan-like “UltraFlex” solar arrays around an hour-and-a-half after launch, and the cargo craft is set to fine-tune its approach to the space station with a series of thruster firings over the next two days.

Orbital ATK christened the Cygnus cargo carrier the S.S. Gene Cernan, after the late moonwalker who died in January. The resupply run is named OA-8, the eighth operational cargo launch made by Orbital ATK since January 2014 under a multibillion-dollar contract with NASA.

Artist’s illustration of a Cygnus spacecraft approaching the International Space Station. Credit: Orbital ATK

The automated spaceship will guide itself to a point around 30 feet (10 meters) beneath the space station, close enough for astronaut Paolo Nespoli to capture it with the lab’s Canadian-built robotic arm around 4:50 a.m. EST (0950 GMT) Tuesday.

The robotic arm will place the Cygnus spacecraft on a berthing location on the Earth-facing side of the station’s Unity module for a nearly three-week stay.

Members of the station’s six-person crew will unload 7,118 pounds (3,229 kilograms) of cargo from the Cygnus spacecraft’s pressurized module beginning Wednesday. The supply shipment includes:

  • 2,734 pounds (1,240 kilograms) of crew supplies
  • 1,631 pounds (740 kilograms) of science investigations
  • 291 pounds (132 kilograms) of spacewalk equipment
  • 1,875 pounds (851 kilograms) of vehicle hardware
  • 75 pounds (34 kilograms) of computer resources

Fresh fruit and vegetables are among the goodies riding inside a refrigerator on Cygnus spacecraft.

“The crew is going to get some treats when they open up the hatch,” said Dan Hartman, NASA’s deputy space station program manager.

The station’s four crew members living and working in the U.S. segment of the outpost will get to work on a multitude of experiments carried in the Cygnus. They will also relocate some research hardware already on the station into a rack inside the Cygnus cargo module, using the facility as a temporary research base.

Among the scientific supplies set for delivery to the station Tuesday are gas bottles to support an advanced combustion microgravity experiment, a habitat for research rodents launching on a future mission, and items for a 3D printer aboard the orbiting laboratory, according to Camille Alleyne, associate space station program scientist at NASA’s Johnson Space Center in Houston.

Two CubeSats will be transferred inside the space station to join three others for release into orbit through the Japanese lab module’s airlock.

One of the CubeSats is named the E. Coli Antimicrobial Satellite, or EcAMSat, is about the size of a small briefcase. Developed by engineers at NASA’s Ames Research Center and scientists at Stanford University, EcAMSat will study the antibiotic resistance in space of E. coli, a bacterial pathogen responsible for urinary tract infection in humans and animals.

The EcAMSat spacecraft undergoes thermal vacuum testing. Credit: NASA

EcAMSat’s mission is expected to last more than a year, and two types of E. coli cells — a wild and a mutant strain — contained in 48 microfluidic wells inside the CubeSat’s miniature laboratory will be activated, grown and tested once the 23-pound (10-kilogram) satellite is ejected from the station’s Japanese robotic arm, according to Stevan Spremo, EcAMSat’s project manager.

“With this, we believe that we’ll learn more about antibiotic resistance in the microgravity environment, where E. coli are known to grow more virulently in space,” Spremo said.

The results could help protect astronauts on future space missions and develop countermeasures that may be useful for humans on Earth, he said.

The other small spacecraft carried on the OA-8 mission and destined for deployment through the Kibo airlock is TechEdSat 6, another experimental CubeSat from the Ames Research Center in partnership with San Jose State University and the University of Idaho.

TechEdSat 6 is the latest in a series of CubeSats testing an “exo-brake” de-orbit system, a drag device that uses aerodynamic forces — and not propulsion — to re-enter the atmosphere. The technology could eventually allow some space station research samples to return to Earth sooner, and at less expense.

Station astronauts will repack the Cygnus spacecraft’s Italian-built logistics module with trash before closing hatches and detaching the supply ship from the Unity module with the robotic arm Dec. 3.

Mission control will maneuver the Cygnus a few feet from another berthing port on the station’s Harmony module, where crew capsules from Boeing and SpaceX are expected to dock once they are ready to begin flying astronauts into orbit.

Engineers will use the Cygnus spacecraft to simulate the presence of a commercial crew craft at Harmony’s space-facing port and check to ensure it does not block GPS navigation signals from reaching the space station.

Once those tests are finished, the robotic arm will release Cygnus on Dec. 4, and Orbital ATK’s ground team will send commands to raise the ship’s orbit to an altitude of around 300 miles (500 kilometers).

In that orbit, Cygnus will deploy 14 more CubeSats — ranging in size from a Rubik’s Cube to a loaf of bread — from an external device provided by NanoRacks, a Houston-based company that offers small satellite deployments on space station cargo flights.

“OA-8 is yet another unique mission for NanoRacks,” said Henry Martin, NanoRacks’ senior mission manager. “We’re thrilled to have a full external Cygnus deployer, displaying its maximum capability. This mission also brings new customers from outside the industry into space while continuing partnerships with existing customers like Spire for their ongoing satellite constellation. Notably, this mission will also deploy our first-ever propulsive satellite from the Cygnus spacecraft.”

Eight of the CubeSats will join Spire Global’s commercial weather satellite network, which derives humidity and temperature profiles by measuring GPS navigation signals passing through Earth’s atmosphere.

Two AeroCube satellites assembled by the Aerospace Corp. for NASA’s Optical Communications and Sensor Demonstration, or OCSD, mission will test high-speed laser communications and an innovative water-based propulsion system to maneuver in close proximity to one another.

“Our primary mission for OCSD is to demonstrate laser communications by using a laser on the spacecraft to downlink data to our optical ground station on Mt. Wilson in California,” said Richard Welle, Aerospace senior scientist and one of the principal investigators for OCSD. “This is the first CubeSat laser communications system that will demonstrate an optical downlink. This compact laser package with its potential for much higher rates proves a promising future for CubeSat-scale laser communications.”

The ISARA CubeSat developed by the Jet Propulsion Laboratory will study the performance of an integrated solar array and radio antenna and a compact suite of three visible and infrared cameras that could be employed on future weather satellites.

The Naval Postgraduate School’s PropCube 2 CubeSat is also slated for deployment from Cygnus in December to measure disturbances in the ionosphere, an upper layer of Earth’s atmosphere.

The Cost-effective High E-Frequency Satellite, or CHEFSat, from the Naval Research Laboratory will help engineers gauge the performance of a consumer-grade radio frequency device in space.

The first satellite for Asgardia, an organization that aims to become the first nation state in space, was also launched Sunday. The group was created by Igor Ashurbeyli, a Russian scientist, and the Asgardia 1 satellite hosts a 500-gigabyte solid state drive containing files and data uploaded by the organization’s supporters, or citizens.

The Cygnus spacecraft will fall out of orbit in December after wrapping up the CubeSat deployments and burn up in the atmosphere over the South Pacific Ocean, discarding the space station’s trash and other unneeded items tagged for disposal by NASA.

Email the author.

Follow Stephen Clark on Twitter: @StephenClark1.

Do NOT follow this link or you will be banned from the site!