Spaceflight Now: Atlas launch report

Atlas 2A vehicle data
SPACEFLIGHT NOW
Posted: October 17, 2000

The Atlas 2A is a two-and-one-half stage rocket capable to lifting payloads of 3,070 kg (6,760 lb) into a geostationary transfer orbit. It features no strap-on solid rocket boosters and is the least powerful version of the Atlas family.


ATLAS STAGE

Size: 3.05-m Dia x 24.90-m Length

Propellant: 156,400-kg Liquid Oxygen & RP-1

Propulsion: Rocketdyne MA-5A booster and sustainer engines

CENTAUR UPPER STAGE

Size: 3.05 m Dia x 10.06 m Length

Inert Mass: 1,840 kg

Propellant: 16,930 kg Liquid Hydrogen & Liquid Oxygen

Propulsion: Two Pratt & Whitney restartable RL-10A-4 engines

Vehicle description
Atlas is the name of a family of booster stages. Centaur is a family of high-energy, restartable upper stages. Atlas 2A is the designation for an Atlas 2A booster combined with a Centaur 2A upper stage.

The Atlas 2A is a two-and-one-half stage launch vehicle. The Centaur upper stage is mounted on top of the one-and-one-half stage Atlas booster.

Atlas Booster
The Atlas booster is 10 feet in diameter and 81.7 feet long. The propellant tanks are a thin-wall, fully monocoque, corrosion resistant stainless steel construction. The fuel tank, which contains RP-1, and the oxidizer tank, which contains liquid oxygen, are separated by an ellipsoidal intermediate bulkhead. Structural integrity of the tanks is maintained in flight by the pressurization system and on the ground by either internal tank pressure or application of mechanical stretch.

  Liftoff
The Atlas rumbles off its launch pad with the most recent DSCS satellite in January. Photo: ILS
 
The Atlas uses the Centaur avionics system for guidance, flight control, and sequencing functions. An external equipment pod houses Atlas systems such as range safety, propellant utilization, pneumatics, and instrumentation.

Atlas booster propulsion is provided by the Rocketdyne MA-5A engine system, which includes the sustainer engine and booster engine system. All engines are ignited before liftoff and develop a total sea-level-rated thrust of 490,000 pounds. The section containing the booster engine is jettisoned (booster package jettison [BPJ]) at an axial acceleration of 5.0 g. Flight continues powered by the sustainer engine ("sustainer phase" flight) until propellant depletion.

The Atlas is connected to the Centaur by the interstage adapter. This aluminum structure provides the structural link between Atlas and Centaur. The Atlas is separated from the Centaur by a flexible linear-shaped charge system attached to the forward ring of the interstage adapter.

Centaur Upper Stage
Centaur, the Atlas 2A upper stage, is 10 feet in diameter and 33 feet long. It employs high-energy liquid hydrogen and liquid oxygen propellants separated by a double-wall, vacuum-insulated intermediate bulkhead. The propellant tanks (like those of the Atlas stage) are of thin-wall, fully monocoque, corrosion-resistant stainless steel construction. Tank stabilization is maintained at all times by internal pressurization or application of mechanical stretch.

Centaur avionics packages, mounted on the equipment module, control and monitor all vehicle functions. Centaur avionics perform the inertial guidance and attitude control computations for both Atlas and Centaur phases of flight, and control Centaur tank pressures and propellant use.

The Centaur propulsion system uses two RL10A-4 engines manufactured by Pratt & Whitney. The Centaur engines are restartable and are capable of multiple firings in space, separated by coast phases.

The stub adapter and equipment module are attached to the forward end of the Centaur. The stub adapter is bolted to the forward ring of the Centaur tank and supports the equipment module and payload fairing. The equipment module attaches to the forward ring of the stub adapter and provides for mounting of the Centaur avionics and the spacecraft adapter.

Payload Fairing
The payload fairing protects the spacecraft from time of encapsulation through atmospheric ascent. The fairing used by the DSCS mission is 11 feet in diameter.

The payload fairing is a two-half-shell structure constructed of aluminum with vertical, split-line longerons. It consists of a cylindrical section topped by a conical nose cone and a spherical cap.

The conical section external surface of the fairing is insulated with cork to limit temperatures to acceptable levels. Non-contaminating thermal control coatings are used on internal surfaces to reduce incident heat fluxes to the spacecraft. Approximately 61 seconds after Atlas booster jettison, the payload fairing is jettisoned.

Spacecraft Adapter
The mechanical interface between the DSCS spacecraft and the launch vehicle is provided by a Lockheed Martin Astronautics standard adapter and a payload separation system.

Flight data file
Vehicle: Atlas 2A (AC-140)
Payload: DSCS B11
Launch date: Oct. 19 2000
Launch window: 2336-0055 GMT (7:36-8:55 p.m. EDT)
Launch site: SLC-36A, Cape Canaveral, Fla.

Pre-launch briefing
Launch preview - Read our story for a complete preview of the DSCS B11 launch.

Launch timeline - Chart with times and descriptions of events to occur during the launch.

DSCS - Description of the satellite to be launched on AC-140.

Launch windows - Listing of the available opportunities to launch in coming days.

Atlas index - A directory of our previous Atlas launch coverage.



MISSION STATUS CENTER