|
|
|
|
|
Enceladus in color CASSINI PHOTO RELEASE Posted: March 16, 2005 This false-color, close-up look at Saturn's moon Enceladus yields new insight into the different processes that have shaped the moon's icy surface.
On the left side of the scene are grooved, icy plains. This broad, relatively flat region is scored by an extensive band of parallel grooves that appear to subdivide the surface into narrow lanes approximately 1 kilometer or half a mile wide. The low abundance of impact craters and crisp relief on topographic features here imply that this region is geologically much younger than the cratered terrain at the right. This view is a composite of images taken using filters sensitive to ultraviolet (centered at 338 nanometers), green (centered at 568 nanometers), and near-infrared (centered at 930 nanometers) light, and has been processed to accentuate subtle color differences. The uppermost surface of these terrains has a relatively uniform pinkish cast in this picture, suggesting that it is covered with materials of homogeneous composition and grain size. However, many of the fractures reveal a distinctly different color (represented by greenish tones in this false-color image) than the typical surface materials in this region. The fractures seem to penetrate down to a material that is texturally or compositionally different than most surface materials. One possibility is that the walls of the fractures expose outcrops of solid ice or ice with different grain-sizes compared to powdery surface materials that mantle flat-lying surfaces. It is also possible that the color identifies some compositional difference between buried ice and ice at the surface. The scene is located on the side of Enceladus that faces away from Saturn. The images were obtained with the Cassini spacecraft narrow-angle camera when the spacecraft was at a distance of approximately 25,700 kilometers (15,969 miles) from Enceladus and at a Sun-Enceladus-spacecraft, or phase, angle of 46 degrees. Resolution in the image is about 150 meters (490 feet) per pixel. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. |
|
|
|
||||||||||||||||||||||
The first Boeing Delta 4-Heavy rocket ignites and lifts off from pad 37B at Cape Canaveral Air Force Station on its demonstration test flight as seen through this sequence of images from a sound-activated still camera.
A second sound-activated still camera placed at pad 37B by Spaceflight Now photographer Ben Cooper provides a different view of the Delta 4-Heavy rocket launch.
This sequence of images from a sound-activated still camera fitted with a fisheye lens was stitched together to provide a unique perspective of the Lockheed Martin Atlas 5 rocket blasting off from Complex 41 with the Inmarsat spacecraft.
The fifth Lockheed Martin Atlas 5 rocket blasts off to deploy the Inmarsat 4-F1 mobile communications spacecraft into orbit. (2min 35sec file)
An extended length clip follows the Atlas 5 launch from T-minus 1 minute through ignition of the Centaur upper stage and jettison of the nose cone. (6min 43sec file)
An onboard video camera mounted to the Atlas 5 rocket's first stage captures this view of the spent solid-fuel boosters separating.
This view of the Atlas 5 launch was recorded from the Kennedy Space Center Press Site. (1min 27sec file)